This past weekend I had the privilege of participating in OSU MRI conference. I was able to sit-in on a number of the presenters, plus I presented, and was asked to sit-in on a panel discussion on safety with Bill Faulkner and Candi Roth. The conference provided me the opportunity to hear from a number techs regarding their most recent Joint Commission surveys, and I was encouraged by what they had to say.

My (longstanding) prior criticism of the Joint Commission and their MRI patient safety survey efforts have centered around one simple fact… they didn’t do anything with respect to MRI safety. JCAHO hasn’t ever had MRI-specific standards or survey criteria, but I was certain that the 2008 release of Sentinel Event Alert #38 on MRI accidents and injuries would change that, instantaneously (a SEA being the Joint Commission’s ultimate patient safety warning). It didn’t.

I was certain that the change to the Joint Commission’s 2009 changes to their Environment of Care (EC) standard which specifically invoked Sentinel Event Alerts would immediately change their survey methods. Reports I received from JCAHO accredited providers who were surveyed in the first half of 2009 indicated that I was to be disappointed again. But at the OSU conference, the clouds parted and glorious beams of hope shot down from the sky and landed on me.

Yes, I did hear several of the expected ‘their shadow never crossed our doorway’ stories of JCAHO surveyors ignoring MRI. There were also the accounts of ‘checked fire extinguisher and walked out.’ As little as one year ago, I would have expected that to be the end of the list, but several people came up to me and recounted recent surveys in which Joint Commission surveyors asked about…

• Screening forms
• ACR four-zone separations
• MR Conditional equipment
• Infection control procedures
• Emergent / code procedures, and,
• Ferromagnetic screening

One person told me of how the surveyor spent more than 30 minutes in their department, tracing the entire sequence of the screening and care of an MRI patient.

These heartening stories of surveyor attention to MRI were the minority, but given that JCAHO surveys occur on a 3-year interval, that there was any change in the status quo in the past year is likely an indicator of a significant prioritization of MRI safety at the Joint Commission.

The hazards of MRI come from the fact that – as soon as you step into that room – the fundamental laws of physics change, without any outward indication. Non-ferromagnetic objects still fall down, but ‘gravity’ works in a different direction for magnetic materials. This simple, invisible truth requires a host of MRI-specific safety protocols. Application of generalized hospital-wide patient safety standards to MRI hasn’t worked terribly well (as in, not at all) in the past, so I can’t tell you how encouraged I am by this recent news.

If one is truly interested in patient safety, and has been critical of others for a lack of attention to these issues, there is no sweeter sound than to hear that you are wrong. When weighed against the benefits to be realized by MRI patients, staff and providers from enhanced safety (fewer accidents), any swelling of my personal ego is of zero importance. I hope that the degree of my wrongitude only grows from here going forward.

‘On the Joint Commission,’ I should add. I do have my weekly PowerBall lottery ticket, and I would very much love to be right on that.

Click here for Tobias’ Twitter Profile

The other two have had modality-specific accreditation programs for years, so what was the TJC going to do? Well, they’ve released their accreditation criteria, and one of the most wonderful surprises is that MRI safety is more prominent than it is in either of the other two ‘imaging’ accrediting bodies!

That’s right, the ACR, despite having been the name behind three publications of the ‘White Paper on MR Safety’  (now the ‘Guidance Document for Safe MRI Practices’), has no physical safety standards for their MRI accreditation program. And at last check, ICAMRL didn’t even have the contemporary terminology for MRI safety-tested medical devices in their standards. So, in an amazing ‘come from behind’ showing, TJC has now bested the veteran agencies in patient safety protections.

From the perspective of MRI patient safety, one of the most wonderful things is the addition to the Joint Commission’s Environment of Care (EC) standard. In this updated version (effective immediately), TJC explicitly mandates MRI safety protections:

Excerpted from EC 02.01.01, EP 14

At a minimum, the organization manages safety risks in the magnetic resonance imaging (MRI) environment associated with the following:
- Patients who may experience claustrophobia, anxiety, or emotional distress
- Patients who may require urgent or emergent medical care
- Metallic implants and devices
- Ferrous objects entering the MRI environment

OK, I might have chosen a slightly different list, but these four items nail some of the greatest environmental threats to the safety of patients and staff in the MRI suite. And given that it’s the first requirement from an accrediting body (the recent MRI safety changes to the healthcare building code, Guidelines, are regulatory / licensure requirements), I’m more than happy to give JCAHO a little slack.

If you would like to download your own PDF copy of the changes to the ambulatory accreditation program’s Environment of Care standards, which includes the explicit MRI safety requirements, identified above, please click here.

In a nutshell, these new standards echo many, many prior recommendations, including JCAHO’s own, for MRI safety. Namely, these are to plan for emergent situations, screen patients more effectively for contraindications, and screen for ferromagnetic materials.

With the new EC standards it is no longer acceptable to simply say, ‘yeah, we have a policy and procedure manual that outlines how to handle each of these.’ Now, as a part of regular accreditation, providers will have to provide risk assessments and explain how their actions are proportionate responses to those risks.

Earlier in that same EC standard, it makes specific mention to seeking external sources of information to establish risks and responses. For MRI, that list would likely include the ACR Guidance Document, the VA’s MRI Design Guide, the ASHE monograph ‘Designing and Engineering MRI Safety’, the ECRI Institute’s Top-10 Medical Technology Hazards, and perhaps even the MHRA MRI risk assessment.

What recommendation is common to all of these industry-standard-setting publications (that explicitly addresses one of the 4 new EC requirements)? The use of ferromagnetic detection systems.

As you conduct your risk assessments, and determine a path to MRI safety and regulatory conformance, I hope that you’ll contact the people at Mednovus regarding their ferromagnetic MRI screening systems. When your next state or accreditation surveyor comes around, you’ll be so very glad you did.

Click here for Tobias’ Twitter Profile

This is just one example of a laundry-list of serious projectile accidents that occurred in 2009.

I should note that the above isn’t a real X-ray of this injury, but hopefully it was ‘real enough’ to at least get you to swallow hard at the thought.

In this incident occurred when a technologist was positioning the patient on the table for the MRI exam. At that moment, the person who brought the patient to the MRI department entered the room with a pair of ferromagnetic scissors. The rest, as they say, is history.

But what about this one event makes it worth holding out as an example?

It, like the many other serious projectile injuries of last year, was completely avoidable. And the same is true for the burn injuries, and those that occurred as a result of incomplete clinical screening. These three causes are responsible for over 90% of the serious injuries in MRI.

Often these occur because the only accident protection in place is the vigilance of the technologist on duty (which, increasingly often, is only a single individual). When everything depends on that one, fallible, individual, the process will break down.

Effective clinical screening depends, in part, on the appropriate prescription of MR studies by primary care clinicians (more than half of which, according to a recent study, were unaware that medical implants were a contraindication for MRI exams). A review of the patient’s accurate medical records, effective pre-screening by scheduling staff, careful review of the patient’s screening form, all of which should be done to reduce the burden on the Technologist.

For burns, patients should be transported to MR without any extraneous monitors, equipment or devices. Upon arriving, they should be switched to MR Conditional monitoring equipment, as needed. The site should provide ample insulating and positioning pads to properly situate the patient for the exam. As with the preliminary screening steps, these will also reduce the burden on the Tech’s unblinking vigilance to prevent these types of accidents.

For projectiles, it isn’t realistic to keep a metal-free MRI suite. This means that the objects which can hurt patients or staff, and damage million-dollar scanners, are littered, like time-bombs, throughout our day. Changing patients, educating key support staff, implementing rigorous access controls, and using ferromagnetic detection can dramatically cut the risks associated with projectile accidents.

These preventative steps, above, have two things in common. First, their almost universally accepted as industry best practice. Second, they are universally omitted from any patient safety requirements! That’s right, no regulatory or accreditation body has objective standard requirements for screening, positioning, or projectile protection!

As long as these instances of head-piercing scissors, or leg-crushing gurney rides, or brain-damaging flying carts, or face-whalloping monitor panels, or any of the others, are viewed as just text descriptions of statistical aberrations, instead of easily-preventable human tragedies, we’ll stay stuck with ineffectual recommendations and scores of stupid, stupid injuries.

Click here for Tobias’ Twitter Profile

You see, back in 1983 when GE was going through their pre-market approvals with the FDA for their first commercial clinical MRI system, they indicated that MRI suite safety minimally required ferromagnetic detection pre-screening. The only problem was, it hadn’t been invented yet!

During R&D the physicists at GE discovered that the MRI scanner could be tuned in such a way to create something of a ‘worm hole’ and permit time-travel. Anyone who has spent 2 or 3 hours in an MRI, only to have their wristwatch tell them they’d only been in it for 30 minutes, won’t have a hard time believing that there’s still some vestige of time-warp still left, even in contemporary MRI scanners.

What did the GE physicists see during their clandestine time-traveling jaunts into the 21st century? We suspect that they saw MRI’s everywhere – hospitals, imaging centers, strip malls – and each and every one of them was protected by ferromagnetic detection pre-screening devices. When they returned to 1983, it seemed such a natural thought, to protect patients, staff and these marvelous machines, that the requirement for ferromagnetic detectors actually made it into their safety submittals to the FDA.

Admittedly, I’m taking (more than a little) artistic license here. What GE actually stated in their November, 1983 ‘Hazard Analysis’ that accompanied their MRI device application to the FDA was that metal detection (for prevention of ferromagnetic projectile accidents) was a “minimum requirement” for safety in the MRI suite.

As described in my exhaustive summary of a couple weeks ago, conventional “airport” style metal detectors are actually horribly counterproductive to pre-MRI screening for most patients, particularly when screening for ferromagnetic materials. Operationally, this is a truth that simply couldn’t be known to GE at the time that they were preparing their recommendations for MRI safety, a concern that never really existed before they brought this product to market.

This metal detector “minimum requirement” soon became an unwelcome nuisance, and GE’s promotion of it as a safety tool withered to near-nothingness.

That’s not to say that the hazard that the metal detector was to help mitigate withered, too. In fact, as GE (and Siemens, and Philips, and Toshiba, and Hitachi…) made stronger and better MRI systems, the risks of ferromagnetic projectiles kept ratcheting upward, too.

Today we’re faced with sticky situation… The entire FDA approval of MRI can be traced back to this GE application, which recognized – and required – projectile protection. The only available tool (at the time) turned out to be far less effective than hoped, so its use was discontinued. After a tragic, headline-grabbing MRI projectile fatality in 2001, real ferromagnetic (only) MRI pre-screening instruments were developed, and have been available for a number of years. However, these new tools, which respond specifically to the needs identified by GE almost 30 years ago, haven’t been appointed by manufacturers and regulators to the safety role that they’re meant to play.

Perhaps it’s all a product of the ongoing effort on the part of the government to keep the secret of time-travel… well… secret, but nobody seems interested in revisiting patient protections called for in 1983.

And what became of those GE physicists who originally stumbled upon the secret of MRI time-travel? Well, after collecting data on the forthcoming 20 years worth of Superbowls, World Series’, and PowerBall jackpots, they each decided that working for a living was, simply, too much work.

But you can bet, whatever private island-paradise they own today, when their doctor proscribes them an MRI, they find one with ferromagnetic pre-screening.

; )

Click here for Tobias’ Twitter Profile

Ready? OK…

Let’s start at the very beginning (“what a very good place to start”). Back in the 80′s, when GE was seeking FDA approval for their new-fangled ‘nuclear magnetic resonance’ scanner, they were keenly aware of the risks of things going flying into the giant magnet. It turns out to be extremely difficult to have a giant, super-powerful electromagnet (one that doesn’t have an on/off switch) that doesn’t draw in every conventional ferromagnetic wheelchair, oxygen tank, gurney, mop bucket, rolling cart, etc… that comes near.

New Ferromagnetic Detector Requirement to Mitigate Magnetic Projectiles Risks In MRI Suites

In an effort to help identify these threats before they were brought into the room, the GE application to the FDA called for mandatory metal detectors for screening patients and equipment as a part of each and every MRI installation.

Well, it turns out that this well-intentioned gesture was not very practical. As sites that have foolheartedly ventured down this path can tell you, darn near everything that is brought to the MRI suite has metal in it. This means that darn near everything, including objects that are at no risk of flying into the MRI, will set off the conventional metal detector. If the objective is to find only those things that would like to go flying into the MRI scanner, your conventional ‘airport style’ metal detector is of no use.

In the 1980′s there weren’t alternative means of detecting only ferromagnetic materials (those that become magnetized and get drawn to the MRI scanner), so the GE requirement for metal detection atrophied to nothing, becoming a forgotten (well-intended) bad idea.

Fast-forward about 20 years. At this point MRI technology is ubiquitous at hospitals (those with at least a couple hundred beds) across the country. Estimates were that there were somewhere around 8,000 MRI scanners in the US, and that most of them were GE products.

Concurrent with the growth in numbers of MRI scanners were increases in the magnetic strength and improvements to the ‘active shielding’ systems. Each of these enhancements had the coincidental effect of increasing the forces that draw magnetic materials into the scanner. When coupled, these factors actually multiplied the attractive force applied to magnetic objects, meaning that the risks associated with magnetic-projectiles flying into MRI scanners increased dramatically as the imaging technology advanced.

There have been magnetic-projectile accidents that jeopardize patients and staff in the MRI suite as long as there have been MRI scanners. The overwhelming majority of these remain ‘under the radar’ of safety, regulatory and accreditation bodies. One event occurred in the summer of 2001, however, that exploded through the veil of embarrassment that typically keeps these types of accidents secret.

In 2001, a young boy was anesthetized for an MRI scan and required oxygen during the exam. When the wall-outlet O2 didn’t work, the anesthesiologist called for oxygen. The technologists administering the exam left the control room to try and fix the oxygen supply problem and, while they were out, a nurse entered and told the anesthesiologist that there were oxygen tanks right there in the control room. Immediately upon bringing one of the portable tanks into the MRI scanner room, the magnetic field of the MRI ‘grabbed’ the tank and pulled it into the center of the doughnut-shaped scanner, where it struck the boy.

That six-year-old boy, Michael Colombini, died from the injuries a couple days later.

Splashed across the media and throughout radiology journals & trade publications, this event reignited the interest in metal detectors, many of the lessons learned from the prior experiments with ‘airport style’ detectors having been forgotten.

“If only there was a metal detector that only alarmed on magnetic materials,” was a common refrain. In 2001, there wasn’t (at least not an effective commercial product for pre-MRI screening). Ever the ‘mother of invention,’ the necessity for a magnetic-projectile screening tool prompted several companies, including Mednovus, to develop ferromagnetic only detection systems.

These products started becoming commercially available just a few years after the 2001 Colombini tragedy, and initially struggled to differentiate themselves from the failed legacy of’ ‘airport style’ detectors. In the years since, however, ferromagnetic detectors have become viewed as a valuable tool for safety in the MRI suite.

Would GE have mandated ferromagnetic detection (instead of the ‘airport style’ metal detectors) with their FDA application if the products had been available 20 years ago? Since the stated intention was to prevent projectile accidents, it would seem logical that they would have. They’re not the only MRI manufacturer to have indicated that choice, either.

In a 2008 interview with the Israeli business publication, Globes, Walter Marzendorfer, CEO of Siemens Medical Systems’ MRI Business Unit, was quoted as saying, “[t]he main safety issue where MRI is involved is the fact that it is a magnet. Accidents happen when a doctor enters the MRI room with a scalpel in his pocket and bends over the patient. People forget. There must be metal detectors at the entrance to every room with a MRI device.”

It would seem that Siemens has exactly the same take on the necessity for projectile safety in the MRI environment that GE had, namely that there should be some form of automated screening. I’ll chalk-up the use of the term “metal detector,” instead of the projectile-specific screening provided by a ferromagnetic detector, to the multiple languages likely involved in ultimately arriving at an English text. Both GE and Siemens have stated the necessity for some form of automated projectile screening, but it doesn’t end with the equipment manufacturers.

GE and Siemens aren’t alone in the calls for some form of  requisite screening for projectile risks…

• In 2007, the ACR Guidance Document for Safe MR Practices amended language from prior publications which recommended against ‘airport style’ detectors to include the explicit recommendation for using ferromagnetic detection systems.
• In 2008, the US Department of Veterans Affairs (VA) MRI Design Guide echoed this recommendation.
• In 2008, the Joint Commission’s Sentinel Event Alert #38 offered ferromagnetic detection systems as an example of a conformance tool for their objective of verified patient screening.
• In 2009, the American Society of Healthcare Engineering (ASHE) published a monograph entitled Designing and Engineering MRI Safety which explicitly called for ferromagnetic screening.
• In 2009, ECRI Institute published their Top-10 Medical Technology Hazards watch-list for 2010. On that list is MRI projectiles and among the ECRI Institute’s recommendations are ferromagnetic detection systems.

There are others, but you get the gist. The technology of the ferromagnetic detector answers the need for MRI projectile protection which was identified nearly 30 years ago. It fits precisely with the intention of GE’s original FDA application for approval of MRI as a clinical device, and with the much more recent statement by Siemens’ top MRI guy. It has been recommended by major institutional standards and both professional and accrediting bodies, so it must be a ‘done deal,’ right?

Unfortunately, there has been one missing element… a requirement for MRI projectile safety protections.

It turns out that ‘perfect fits’ with manufacturers’ intentions and a ‘who’s who’ list of recommending bodies wasn’t enough. Yes, there have been many adopters of ferromagnetic screening tools, but estimates are that most of the MRI providers in the US still don’t use ferromagnetic screening for people entering the MRI suite. If they’ve been waiting for a requirement, that wait is just about over.

42 of the 50 US states, the Joint Commission, and many, many other health regulatory bodies around the world, use the Guidelines for Design and Construction of Health Care Facilities, originally jointly produced by the American Institute of Architects (AIA) and the US department of Health and Human Services (HHS). With updates to the standard published every 3 to 4 years, Guidelines is, in effect, the building code that governs most licensed and accredited MRI providers in the US. The 2010 edition of Guidelines just came out last month.

In the 2010 edition, for the very first time, Guidelines includes MRI safety protection requirements in the design criteria. Here’s one excerpt from the new code:

2.2-3.4.4.2 Design configuration of the MRI suite

(1) Suites for MRI equipment shall be planned to conform to the four-zone screening and access control protocols identified in the American College of Radiology’s “Guidance Document for Safe MR Practices.”

(2) The layout shall include provisions for the following functions:

(a) Patient interviews and clinical screening
(b) Physical screening and changing areas (as indicated)
(c) Siting of ferromagnetic detection systems
(d) Access control
(e) Accommodation of site-specific clinical and operational requirements

That’s right, the inclusion of ferromagnetic detection systems is a requisite element of MRI suite design in the 2010 Guidelines!

Since the 2010 edition of Guidelines has only just been published, it hasn’t (as of this writing) yet been adopted by the various authorities that use Guidelines, but that’s only a question of time.

And while the Guidelines, as a building code, might only apply to new MRI facilities and newly-sited MRI equipment, it appears that this may be just the first requirement-domino to fall.

In 2006 (yes, four years ago), the ACR’s MR Safety Committee issued a formal request to the ACR’s MR Accreditation Committee, include the Safety Committee’s Guidance Document principles as requirements for MR site accreditation. The MR Accreditation Committee has agreed that it will do something relative to MR safety in the accreditation process, but has yet to specify what this will be. It makes sense to me that the ACR MR Accreditation Committee would (minimally) appropriate existing physical safety requirements put forward by other entities (preserving the ability to deflect criticism with, ‘it’s not our standard, it’s just one that many of our accredited providers will be held to by other agencies and we felt it prudent to include it in our accreditation standards to make sure that they weren’t otherwise caught unaware.”).

Similarly, the Joint Commission (TJC), having just received ‘deemed status’ and the ability to accredit advanced imaging providers (CT, MRI, PET) for the 2012 Medicare requirements, is purportedly working on imaging-specific patient safety standards. While TJC will adopt the 2010 Guidelines as their physical facility standard, that may also provide them with the ability to develop their own MR safety specific accreditation standards. I would expect to see a flurry of imaging-specific guidance and standards coming from TJC starting this summer / fall.

What does this all mean if you’re an MRI provider? One of the things it means is that if you don’t already have a ferromagnetic detection system, you should get one, and get it soon. Setting aside the ‘best practice’ standards, loss-reduction, safety improvement, and throughput benefits, ferromagnetic detectors will be requirements of accreditation and licensure.

If I can be of any assistance to you, navigating the new requirements or addressing questions about ferromagnetic detection, please do contact me.

Click here for Tobias’ Twitter Profile

Many people in the medical industry, even within radiology, are quick to dismiss stories of accidents in the MRI suite as ‘fish stories’ which, though they may be based on a kernel of truth from the original telling, grow and grow as the story gets passed along the line. What may have begun as a pager getting drawn into the MRI scanner, winds up becoming a telephone repairman… or so goes the rationalization. And some seem to think that most MRI accident stories aren’t even really exaggerations, but rather pure fiction, akin to what you would see on some nighttime television medical drama. To these people, any account of a patient bed hitting the MRI could only have come from an episode of ER (as opposed to a real accident having become the basis of the TV show’s fictionalized version)…

Not that there haven’t been cases of gurneys drawn to MRI scanners before, because the MRI professional communities are awash in stories of all manners of ferromagnetic materials inadvertently becoming MRI-homing magnet missiles. Everything from personal computers, iPods, pagers, cell phones, anesthesia machines, ‘sand’ bags, medical gas (oxygen) cylinders, welding tanks, rolling carts, wheelchairs, hand-tools, canes & walkers, furniture, filing cabinets, hand-trucks, and the list goes on, and on, and on (to see pictures of a number of items, please check out this prior post). And yes, even hospital gurneys…

MRI Scanner Eats an ICU Patient Bed

Much to my chagrin, I’ve heard people dismiss the above as somebody’s Photoshop fantasy. Those sorts of statements, sadly, work to diminish all efforts toward MRI safety. But a recent account should, permanently, put to rest any question of whether this sort of thing can really happen. Late last year I posted a story that included links to a number of FDA MRI accident reports. One of the reports to the FDA’s MAUDE database described an incident in which a patient had their foot-ankle-leg injured when they were transported into the MRI scanner room on a conventional gurney (click here to download the PDF file from the FDA’s data). The date in the FDA’s anonymized report coincides very nicely with this somewhat-less-than-anonymous newspaper article that just came out…

Hoag Hospital has been fined $50,000 by the state Department of Public Health after an MRI patient on a metal gurney was magnetically pulled into the imaging machine, the hospital said Friday.

[Dr. Richard] Afable, [chief executive officer of Hoag Memorial Hospital Presbyterian], said that last January a woman was taken into an MRI room on a metal gurney that was not compatible with the machine. The powerful magnet in the MRI pulled the gurney into the machine and the patient’s leg was trapped for about three minutes. She was taken to the emergency room and spent three days in the hospital for treatment of fractures in her lower leg and foot.

The above quote is taken from the January 22nd, 2009 article appearing on the Orange County Register’s website (click here to go straight to the article). Based on the dates, the description of the accident, and the patient injuries, it sounds as if the FDA account is the same incident as what is described in this newspaper article. The $50,000 fine may sound like steep punishment, but considering the cost to restore the magnet after the quench (described in the FDA account), the cost of downtime and lost revenue between the accident and the time the MRI was returned to service, the cost of care to treat the patient, the cost of internal safety / quality / regulatory investigations, the legal costs for the hospital, and any lawsuit settlement costs, the state’s penalty is likely to just be icing on the cake. The cost to the hospital for this transgression could very easily be into 7-figures! All of this simply demonstrates two critical points about MRI safety.

1. MRI accidents do happen, and at greater frequency and cost than many are led to believe.
2. The costs of the safety provisions to help prevent these accidents are peanuts when compared to the costs of accidents.

My soap-box pontificating on this point will likely become moot over the next many months. In a ‘perfect storm’ of regulatory and accreditation attention to MRI safety, we’re very likely to see requirements for MRI safety provisions, such as ferromagnetic detectors (which could have been instrumental in helping to avoid this gurney accident). I will share more about each of these efforts, as I’m able. In the meantime, MRI providers should put a great deal more stock in the validity of MRI accidents accounts and ask themselves, “Do I have adequate physical protections in place, beyond what’s written in my policy manual, to help prevent this sort of accident?” The likely answer is “No.”

Click here for Tobias’ Twitter Profile

ThermaCare HeatWrap Products Contain Iron And May Be Drawn Into MRI Scanners

According to the report, this patient was not injured and the MR staff was able to successfully remove the wrap from the MRI magnet. But any time you have ferromagnetic materials flying through the air near patients and staff, there is the very real risk of injury. Not only to people, but also to a million-dollar MRI scanner!

And assuming that it didn’t go flying, if there’s enough iron in this product that there’s that possibility, there’s likely enough iron to create some significant spatial distortions in the general vicinity of the wrap. And if the little iron ‘nuggets’ were to escape the wrap material and get under the covers to the bore of the magnet, you could wind up with shim problems that require a service call to correct.

According to the ThermaCare website:

“Protected inside ThermaCare^® HeatWraps are air-activated heat discs made of heat-generating materials (iron, charcoal, table salt and water).”

We’re in the process of testing the capabilities of the SAFESCAN® ferromagnetic detectors to detect these materials and I hope to have an update for you on this very soon.

In the meantime, whether you have the SAFESCAN® ferromagnetic screening products or not, please add these types of wraps to your ‘watch list’ of potentially dangerous materials to be kept out of your MRI suites.

Click here for Tobias’ Twitter Profile

One of the most effective means of screening for external ferromagnetic materials, particularly those that may be integrated with non-ferromagnetic MR Conditional objects or devices, is through the use of a ferromagnetic only detection system.

Halo vests are just one of huge number of potential ferromagnetic threats which endanger MRI patients, visitors and staff. Effective pre-screening for these risks should include the appropriate use of ferromagnetic detection systems, and this is more than my personal opinion.

To date, the ACR, JCAHO, the Department of Veterans Affairs and many MRI safety experts have called for the use of ferromagnetic screening to help mitigate just this sort of hazard.

Halo vests are just one of the innumerable objects that can pose grave threats to patients, staff, and MRI equipment if brought within the MRI scanner room. To protect people and scanner up-time, ferromagnetic detection is a wise investment.

]]> http://mrimetaldetector.com/blog/2009/12/rsna-aapm-identify-halo-ferromagnetic-risks/feed/ 2 http://mrimetaldetector.com/blog/2009/12/ecri-top-10-medical-technology-hazard-includes-mri-projectiles/ http://mrimetaldetector.com/blog/2009/12/ecri-top-10-medical-technology-hazard-includes-mri-projectiles/#comments Wed, 02 Dec 2009 19:14:23 +0000 Tobias Gilk http://mrimetaldetector.com/blog/?p=688 Every year the ECRI Institute publishes their Top 10 health technology hazards, identifying the 10 most serious (and unintended) risks posed by our ever-increasing use of sophisticated medical devices to diagnose and treat patients. In November, the Institute released their 2010 watch list, which dedicated a Top 10 slot, and an entire page, to ferromagnetic projectiles in MRI.

The ECRI report references a publication from the Pennsylvania Patient Safety Authority that identified 148 reported cases of inadequate screening for ferromagnetic materials in 2008 in that state alone. Based on what we know about ferromagnetic material risks, my suspicion is that this 148 number is only a drop in the bucket of the actual rate.

Though, if we simply accept the 148 incidents, and multiply times 50 to get a rough approximation for the whole US, that indicates that we have 7,400 annual failed screenings for ferromagnetic material, each of which has the potential to injure patients, staff, or incapacitate a million-dollar MRI scanner.

What to do about this silent safety epidemic that is almost wholly avoidable? Well, it wouldn’t hurt to follow the recommendations of the ECRI Institute, number one of which is:

“Consider installing ferromagnetic detectors to screen patients and equipment. These are handheld wands and walk-through/wheel-through or walkby/ wheel-by detector systems positioned before the entrance to the MR environment.”

–’2010 TOP 10 TECHNOLOGY HAZARDS,’ ECRI Institute

So, we can add the ECRI Institute to the chorus of voices that includes the ACR, VA, JCAHO, and MR safety experts that all call for ferromagnetic detection as a part of pre-MRI screening.

If you would like your own copy of the ECRI publication, they are graciously making it available as a free download from their website.

If you would like information on the Mednovus SAFESCAN® ferromagnetic detection products, these are available on the company’s website.

First, welcome to my humble site. I strive to make information available and accessible about MRI safety and the special breed of metal detectors (called ferromagnetic detectors) that can help strengthen MRI safety.

If you came here from an internet search (such as Google, or Bing), you may be surprised to be reading this instead of an article loaded with the keywords that you were searching for. This site is updated fairly regularly, so the search terms you used may have pointed you to a blog entry that has moved ‘down’ the list, as newer ones have been written. Nothing that has been posted has been removed, so you may want to repeat your search here on the site (the search box up and to the right on the main page).

If you got here by following a link from another content page, please let them know how much I appreciate that they gave you the opportunity to visit.

You’ll find a variety of information here. If you’re generally curious about the blog, itself, check out ‘About MRI Metal Detector’, to the right (on the main page). There you’ll also find information about me, the editor, and our policies for reuse / republication.

One thing you’ll find is that things here are written to be accessible. I try and avoid unnecessarily complicated language, preferring to err on the side of understandability. If you’re looking for lots of technical information, with facts and figures and formulas, this isn’t the place where you’ll find it. I do have a plethora of other sites I can recommend if you’re looking for something that isn’t here.

I do express distinct opinions here, and that includes a level of pride in the products that the company I work for sells.

If there’s anything that you think you should be able to find here, but don’t, please let me know. You may have an idea for a great piece, or may point out an oversight in something that was previously written. Even if it’s something that you want that’s outside of my expertise, I can probably point you to someone else who can help you.

Thank you, again, for visiting MRImetalDetector.com. We invite you to browse, read, and provide your thoughts and comments.

Link