In the Tuesday, December 1st, issue of the RSNA Daily Bulletin, the ‘Tip of the Day’ was provided by the American Association of Physics in Medicine. The tip identifies specific risks of ferromagnetic tools and hardware associated with orthopedic devices, such as ‘halo’ vests…
Every year the ECRI Institute publishes their Top 10 health technology hazards, identifying the 10 most serious (and unintended) risks posed by our ever-increasing use of sophisticated medical devices to diagnose and treat patients. In November, the Institute released their 2010 watch list, which dedicated a Top 10 slot, and an entire page, to ferromagnetic projectiles in MRI.
I’m not prepared to break out into song with ‘Hakuna Matata’ (at least, not yet), but the circular nature of things in life is unmistakable: ironically, the path that my commitment to MRI safety has taken has also produced the unintended consequence of getting me ‘uninvited’ from the ACR’s MR Safety committee.
Let’s look at the circular path it took to arrive here… Click Here For The Rest Of The Story…
(This is a continuation of my recommended MRI safety vendor itinerary, starting at the North Hall, which you can read about here, Lakeside Center, which you can read about here, and the first half of the South Hall, which you can read about here.)
Our company, Mednovus, is making the annual pilgrimage to Chicago after Thanksgiving for the biggest of all radiology trade shows, the Radiological Society of North America (RSNA) annual meeting. In my original post I indicated why I thought MRI safety would be a ‘hot topic’ at this year’s RSNA, and gave an itinerary for the North Hall (the Philips Hall) for stops at relevant vendors, including our company, Mednovus (booth #7801). Then I followed up with an itinerary for the Lakeside Center, and just a couple days ago, I provided half of the South Hall.
Continuing on that theme, and to facilitate your review of MRI safety products and vendors, I’d like to suggest an itinerary for visiting the remaining select group of exhibitors from Exhibit Hall A, the South Hall, where the GE mega-booth is located…
Click To Read The Final Installment Of My MRI Safety Vendor Itinerary…
(This is a continuation of my recommended MRI safety vendor itinerary, starting at the North Hall, which you can read about here, and Lakeside Center, here.)
Our company, Mednovus, is making the annual pilgrimage to Chicago after Thanksgiving for the biggest of all radiology trade shows, the Radiological Society of North America (RSNA) annual meeting. In my original post I indicated why I thought MRI safety would be a ‘hot topic’ at this year’s RSNA, and gave an itinerary for the North Hall (the Philips Hall) for stops at relevant vendors, including our company, Mednovus (booth #7801). Then I followed up with an itinerary for the Lakeside Center.
Continuing on that theme, and to facilitate your review of MRI safety products and vendors, I’d like to suggest an itinerary for visiting a select group of exhibitors, this time in Exhibit Hall A, the South Hall, where the GE mega-booth is located…
For a couple of months, at least, the FDA’s MAUDE database wasn’t displaying all of the accident narratives online… This appears to have been fixed!
A number of the MRI accident reports, when the narratives weren’t appearing, were little more than the name and mailing address of the MRI manufacturer. Today, if you want to read about the MR Technologist who had a pair of scissors magnetically-impelled into his forehead, you can do so. So Click Here If You’re Curious…
“Tweet, tweet” is usually all I hear from little birdies… but one little bird that flew past my office recently had a surprisingly large vocabulary and told me of new requirements that will be introduced in the forthcoming 2010 update to the ‘Guidelines for Design and Construction of Health Care Facilities’ (commonly referred to as ‘Guidelines’).
For those of you who aren’t familiar with the Guidelines, they are the design requirements that are cited by the Joint Commission and, at last count, 42 of the 50 U.S. State Departments of Health. Technically, they aren’t a building code, but the function in almost the exact same way. For the first time, the Guidelines are going to have specific MRI suite design requirements for patient safety.
2010 Guidelines
Click Here To Read About The Specific MRI Safety Design Requirements…
That’s right. Yesterday, October 26th, the Colombini family formally accepted a settlement offer for the MRI vs. oxygen tank accident which killed their 6-year-old son in 2001. The settlement puts to rest 8 years of litigation resulting from the single largest MRI safety incident in the industry’s consciousness. And though precedent-setting verdicts won’t result, the dollar-value of the settlement will likely cause many MRI providers to sit up and take notice.
Just how much is the settlement? Click Here To Learn More About The Settlement…
(This is a continuation of my recommended MRI safety vendor itinerary, starting at the North Hall, which you can read about here.)
Our company, Mednovus, is making the annual pilgrimage to Chicago after Thanksgiving for the biggest of all radiology trade shows, the Radiological Society of North America (RSNA) annual meeting. In my prior post I indicated why I thought MRI safety would be a ‘hot topic’ at this year’s RSNA, and gave an itinerary for the North Hall (the Philips Hall) for stops at relevant vendors.
Continuing on that original theme, and to facilitate your review of MRI safety products and vendors, I’d like to suggest an itinerary for visiting a select group of exhibitors, this time in Lakeside Center (Exhibit Hall D)…
Click Here To View The MR Safety Itinerary For Lakeside Center…
“Hello Orlando!”
“Hello Orlando!”
No, there’s not an echo in this posting. I’m simply rehearsing for two nearly-back-to-back presentations on MRI safety issues to different groups, both in Orlando, Florida, in the weeks ahead.